Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll-Rand G2 Series Product Information

Product Safety Information

Intended Use:
These Air Sanders are designed for both light and heavy sanding jobs such as roughing body
filler, removing rust, and smoothing welds.
For additional information refer to Product Safety Information Manual Form 04580387.
Manuals can be downloaded from ingersollrandproducts.com.

Product Specifications

Free Speed
Model(s)
rpm
G2A100RS10 10000
G2A120RS10 12000
G2A135RS10 13500
G2L075FS10 7,500
G2L100PS10 10000
G2L120RS10 12000
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573784 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
04581195_ed4
Sound Level dB (A)
Arbor Size
† Pressure (L
5/8"-11 83.2
5/8"-11 85.5
5/8"-11 84.9
5/8"-11 81.0
5/8"-11 82.3
5/8"-11 84.8
WARNING
6.
7.
8.
9.
10. Grease
(ISO15744)
) ‡ Power (L )
p w
94.2
96.5
95.9
92.0
93.3
95.8
*K = Vibration measurement uncertainty
Thread size
Coupling
Safety Air Fuse
Oil
EN
Vibration m/s²
(ISO28927)
Level *K
--- ---
--- ---
--- ---
--- ---
<2.5 ---
--- ---
EN-1