Physical Description; Front Panel Leds - Fortinet FortiGate-7000E Series Manual

FIM-7901E interface module
Connector Type
MGMT1 to RJ-45
MGMT4
USB USB 3.0
Type A

Physical description

Dimensions
Weight
Operating Temperature
Storage Temperature
Relative Humidity
Power consumption
Max Current
Heat Dissipation
Joules/h

Front panel LEDs

From the FIM-7901E font panel you can view the status of the module LEDs to verify that the module is functioning
normally.
FIM-7901E Processing Module Guide
Speed Protocol
10/100/1000Mbps Ethernet
USB 3.0 USB
2.0
1.88 x 17.11 x 18.49 in. (48 x 435 x 470 mm) (Height x Width x Length)
16 lb. (7.3 kg)
32 to 104°F (0 to 40°C)
-31 to 158°F (-35 to 70°C)
10% to 90% (Non-condensing)
Max: 450W; Average: 400W
37.5A
1531BTU/h
1609KJ/h
Description
connect to the base backplane channel. These
interfaces are used for heartbeat, session sync,
and management communication between FIM-
7901Es in different chassis. These interfaces can
also be configured to operate as Gigabit Ethernet
interfaces using SFP transceivers, but should not
normally be changed. If you use switches to
connect these interfaces, the switch ports should
be able to accept packets with a maximum frame
size of at least 1526. The M1 and M2 interfaces
need to be on different broadcast domains. If M1
and M2 are connected to the same switch, Q-in-
Q must be enabled on the switch
Four 10/100/1000BASE-T copper out of band
management Ethernet interfaces.
Standard USB connector.
Fortinet Technologies Inc.
7