Power Sliders; Secure Screws; Physical Description - Fortinet FortiGate-7000E Series Manual

FPM-7620E processing module
The module levers do not fully secure the module in the chassis. The secure screws must be tightened to reliably secure
the module in the chassis and to make sure the module remains securely connected to the backplane for power and
network connectivity.

Power sliders

Close the module levers and move the power sliders to their bottom position to lock the module levers and turn the
module power switch on.
Move the power sliders to the top position to unlock the module levers and turn the module power switch off.
Gently push the power sliders down to make sure they are in their bottom position. If the module LEDs do not light the
module is not receiving power. If this happens check the power sliders to make sure they are in their bottom position.

Secure screws

Fully tighten the secure screws to lock the module in the chassis providing a secure and reliable connection with the
backplane.
Loosen the secure screws before ejecting the module from the chassis.

Physical description

Dimensions
Weight
Operating Temperature
Storage Temperature
Relative Humidity
Power consumption
Max Current
Heat Dissipation
Joules/h
FPM-7620E Processing Module Guide
1.69 x 17.11 x 18.49 in. (43 x 435 x 470 mm) (Height x Width x Length)
14.0 lb. (6.4 kg)
32 to 104°F (0 to 40°C)
-31 to 158°F (-35 to 70°C)
10% to 90% (Non-condensing)
Max: 410W; Average: 320W
34A
1395BTU/h
1466KJ/h
Fortinet Technologies Inc.
6