Please refer to the maintenance manual before starting the installation of the charging station. This device is to be installed only by a professional electrician
fitter according to local applicable installation standards. Conform to SELV installation rules.
Page 1
Base-mounting with XEV426 and XEV428 Witty Light commercial XEV6xx 1. Initial precautions Please refer to the maintenance manual before starting the installation of the charging station. This device is to be installed only by a professional electrician fitter according to local applicable installation standards. Conform to SELV installation rules. 2.
Page 2
Base-mounting with XEV426 and XEV428 Floor mounting diagrams for XEV426 + XEV428 Station Installation Area Foundation C20/25, X0 Depth 80 cm Bedding Layer 5 cm, C8/10 XEV428 XEV426 In case of a chemical seal, use threaded rods with diameter of 12 mm. 6LE005084B...
Page 3
The station MUST be mounted on its base BEFORE attaching the vector cabinet. The equipotential bonding must be established between the terminal, foot and base. * The screws are tightened from the bottom 6LE005084B...
Page 4
USB key provided with the terminals and on the Hager website of your country. Correct Disposal of this product (Waste Electrical &...