Siemens SIMOTICS TN Series Operating & Installation Instructions Manual page 17

Rotating parts
Electric machines contain dangerous rotating parts.
Fatal or severe injuries and substantial material damage can occur if the covers are removed
or if the machine is not handled, operated, or maintained properly.
● Only remove the covers using the methods described by these operating instructions.
● Operate the machine properly.
● Regularly and correctly maintain the machine.
● Secure free shaft extensions and other rotating part such as couplings and pulley belts
Hot surfaces
Electric machines have hot surfaces. Touching hot surfaces can result in severe burns.
● Allow the machine to cool before starting work on the machine.
● Only remove the covers using the methods described by these operating instructions.
● Operate the machine properly.
Hazardous substances
Chemical substances required for the setup, operation and maintenance of machines can
present a health risk.
Poisoning, skin damage, cauterization of the respiratory tract, and other health damage may
result.
● Read the information in these operating instructions and the product information supplied
● Observe the relevant safety regulations and wear the personal protective equipment
Flammable substances
Chemical substances required for the setup, operation and maintenance of machines may
be flammable.
Burns and other damage to health and material may result.
● Read the information in these operating instructions and the product information supplied
● Observe the relevant safety regulations and wear the personal protective equipment
SIMOTICS TN Series N-compact 1LL8
Operating Instructions 11/2018
WARNING
so that they cannot be touched.
WARNING
CAUTION
by the manufacturer.
specified.
CAUTION
by the manufacturer.
specified.
Safety information
2.4 Safe handling
17