Receiver Installation; Rack Mounting - Parallel Audio Stage-100 Series Operation Manual

Adjusting Squelch Level
When interference is encountered try reducing the sensitivity of the receiver, thus making it less susceptible
to interference.
1. Press and release SET button until the SQUELCH SETUP page appears.
2. Press p(UP) or q(DOWN) button to choose a new level between 1 and 10.
5 seconds after selecting a level, it will be automatically saved.
Since increasing the squelch level will also reduce the reception distance, it's recommended to choose the lowest level
that can eliminate the interference.
If this still does not solve the problem it means this frequency is not suitable. Adjust the squelch back to its preset level
and use the scan function to locate a clear, interference-free channel.

Receiver Installation

Rack Mounting

The receiver can be cabinet-mounted by either one or two units. If only one receiver is to be mounted, an optional kit is
available and it's installed as shown in Fig 1. If two receivers are to be mounted, they can be assembled by another kit and
installed as shown in Fig 2.
PAGE 6
SQUELCH SETUP
LEVEL:01
For best operation, the receiver should be at least 1m above the ground and 1m away
from a wall or metal surface to minimise reflections. The transmitter should also be
at least 1m away from a wall or metal surface to minimise reflections. The transmitter
should also be at least 1m away from the receiver. Keep antennas away from noise
source such as motors, automobiles, neon light and large metal objects.
SQUELCH SETUP
LEVEL:03
OPERATION MANUAL V1.0