Table of Contents
Advertisement
Channel Setting
For an interference- free operation, a cleaner channel might be necessary if the current one receives too much
interference. To select a new channel:
1.
Press and release SET button until the CHANNEL | FREQUENCY page appears.
2.
Press p(UP) or q(DOWN) button to change the channel number. The corresponding frequency will change
accordingly. 5 seconds after selecting a channel, it will be automatically saved.
Channel Scanning
For an interference-free operation, a cleaner channel might be necessary if the current one receives too much
interference. Before scanning, the transmitter must be switched off.
1.
Press and release SET button until the AUTO SCAN page appears.
2.
Press p(UP) or q(DOWN) button to find a clear, interference-free channel. 5 seconds after selecting a channel,
it will be automatically saved.
PAGE 4
CHANNEL:001
FREQ:650.000MHz
CHANNEL:010
FREQ:652.250MHz
OPERATION MANUAL V1.0
Advertisement
Table of Contents
