Stainless Steel Trough - Miele KM 2014 Operating And Installation Instructions

Cleaning and care
 The entire hob should be cleaned
after each use.
 Soften any stubborn soiling before-
hand.
 Dry the hob thoroughly after every
damp cleaning to avoid limescale
residue.

Stainless steel trough


Risk of damage by pointed ob-
jects.
The seal between the hob and the
worktop could suffer damage.
Do not use pointed objects for clean-
ing.

Damage caused by soiling.
Soiling, particularly salty food or li-
quid and olive oil, can cause damage
if left on the printed surfaces for a
long time.
Remove such soiling immediately.

Damage caused by incorrect
cleaning.
Stainless steel cleaning agents rub
off the printed symbols.
Do not use stainless steel cleaning
agents on printed symbols.
 Clean stainless steel surfaces using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. Soften any stubborn soiling
beforehand. If necessary, the rough
side of a non-scouring sponge can
be used.
 Finally, dry with a clean soft cloth.
32