Basic Operation - MAJORITY PEMBROKE II Instruction Manual

Instructions Guide

Basic Operation

Please note that the instructions within this manual will refer to
the radio button number e.g (Ref.*number*) in accordance to
the diagrams on pages 2-3 and (Rem.*number*) to represent
the remote on pages 4-5.
Starting up your internet radio
Plug the adaptor connector into the back of the system labelled
'DC in' (Ref. 14) and turn the power on from the mains. Switch
the button at the back of the radio to 'ON' (Ref. 13) to display the
Welcome screen.
Ensure the antenna is extended as far as possible. This will
enable you to get the best signal you can.
After the Welcome screen, you will be able to select your chosen
language by scrolling with the Navigation dial (Ref.3). Select
your language by pressing down the dial.
If this is the first time of using your radio, you will get the option
to set up your Wi-Fi to stream Internet Radio with the message
"Would you like to configure network now?". If you select YES,
your radio will begin to scan for nearby networks to connect to.
If you select NO then you can set this up later in configuration
settings.
8