Fujitsu AUU7RLF Design & Technical Manual page 128

2. Connect the remote controller cable.
• Connect the cable made in step 1. to the terminal (*1) of optional communication kit.
• Connect the cable from the terminal (*2) of communication kit to the indoor unit PCB.
*1: CNC01 (for ASU7/9/12/15RLF1: UTY-XCBXZ2)
CNC01 (for ASU9/12/15RLS2: UTY-TWBXF)
CN305 (for ASU7/9/12RLF: UTY-XCBXZ1)
*2: CND01 (for ASU7/9/12/15RLF1: UTY-XCBXZ2)
CND01 (for ASU9/12/15RLS2: UTY-TWBXF)
CN301 (for ASU7/9/12RLF: UTY-XCBXZ1)
Remote controller cable
 Pattern C
1. Modify the remote controller cable as follows:
• Use a tool to cut off the terminal on the end of the remote controller cable and then re-
move the insulation from the cut end of the cable as shown in following figure.
• Connect the remote controller cable and connecting cable as shown in following figure.
• Be sure to insulate the connection between the cables.
2. Connect the remote controller cable.
• Connect the cable made in step 1. to the indoor unit PCB.
13-3. Wired remote controller (UTY-RNNUM)
Connecting cable Terminal
(*1)
Communication kit
Remote controller cable
Connecting cable
Remote controller cable
- 120 -
Terminal
(*2)
Connecting
cable
White
Red
Black
White
Insulated
Red
connection
Black
Indoor unit PCB
Indoor unit PCB
13. Remote controller