Surface Care; Maintaining The Hot Tub Cabinet; Pillow Care - Dimension One Spas @HOME Series Owner's Manual

Hide thumbs Also See for @HOME Series:
Table of Contents

Advertisement

Every other cleaning, soak the filter in filter-cleaning solution and
rinse thoroughly. Reinstall the filter by reversing the steps for
removal, replace the skimmer basket or lid and turn the power back
on. Run the pump(s) for a few minutes at high speed before leaving
the system to its normal heating and filtration cycles.
Vision Cartridge
The Vision Cartridge offers D1 hot tub users a natural and effective
way to reduce the use of chemically-based water sanitation systems.
Used in combination with D1 ozone systems, the Vision Cartridge uses
silver catalyst technology that kills 99.96% of impurities on contact. One
Vision Cartridge lasts up to 6 months and can reduce the need for extra
chemicals by 60% for cleaner, healthier and softer water.
11.2

Surface Care

IMPORTANT: Do not use alcohol, ammonia, bleach or any citrus
based cleaners on any of your hot tub surfaces. Do not use "409"
type cleaners or other caustic solutions as they may damage the
hot tub shell surface and void the warranty.
IMPORTANT: Protect the hot tub surface from the sun and the cold!
Keep the hot tub covered when empty of water. Sunlight and ex-
treme cold can damage the surface and cause it to peel or blister.
Use a hot tub cleaner and a soft rag to clean the inside of your hot tub. Be
sure to thoroughly rinse the shell. After cleaning, you will want to restore
your hot tub shell's original luster by using Dimension One Spas' Poli-Gloss.
11.3

Maintaining the Hot Tub Cabinet

The hot tub cabinet requires little or no maintenance of any kind. To
clean, wipe cabinet with a clean towel and mild detergent soap solution.
CAUTION: Never spray cabinet with a high-pressure garden
hose for any reason since this action may induce an electrical
short in the hot tub's electrical equipment.
11.4

Pillow Care

Remove and clean the headrest pillows, as needed, with soapy water us-
ing a cloth or soft-bristle brush. Always remove the pillows when adding
chemical shock treatment to the spa water. The pillows can be returned
to the spa when the sanitizer reading is stable as recommended.
@Home Collection
Page 25

Advertisement

Table of Contents
loading

Table of Contents