Using a wireless network
Setting up the FortiWiFi-60 as an Access Point
Log into the web-based manager
FortiWiFi-60 Installation Guide
Figure 12: FortiWiFi-60 in Client mode
Wireless Network
.
DMZ
Network
Web Server
Mail Server
Changing the operating mode
To change the wireless operating mode
1
Go to System > Wireless.
2
For the Operation mode, select Change.
3
Select the desired operation mode and select OK.
This section describes how to quickly configure the FortiWiFi-60 unit as an AP to allow
network access for wireless workstations located on the same wireless LAN as the
unit. It also describes how to configure firewall policies and wireless security features
to provide a secure wireless environment.
This section contains the following steps:
•
Log into the web-based manager
•
Set the DHCP settings
•
Set the security options
•
Configure the firewall policies
To set up the FortiWiFi-60 as an access point, you must configure the FortiWiFi-60
unit. For initial setup, use a desktop computer on the internal network with TCP/IP set
as DHCP client.
Internal Network
.
Internal
DM Z
INTERNAL
PWR
WLAN
1
2
3
4
DMZ
LINK 100
LINK 100
LINK 100
LINK 100
LINK 100
WAN1
FortiWiFi-60
Access Point
Broadband (cable or DSL)
T1
Internet
01-28008-0030-20050128
Setting up the FortiWiFi-60 as an Access Point
WAN1
WAN2
LINK 100
LINK 100
WAN2
FortiWiFi-60
Client
INTERNAL
PWR
WLAN
1
2
3
4
DMZ
WAN1
WAN2
LINK 100
LINK 100
LINK 100
LINK 100
LINK 100
LINK 100
LINK 100
Internal Network
37