Table of Contents
Advertisement
MAINTENANCE
SERVICE
If you have any questions or troubles, please contact your Bushranger
CARBURETTOR
• Do not adjust the carburettor. If adjustment is required return the saw to your local Bushranger
AIR FILTER
• Check before every use.
REMOVING AIR FILTER - Fig. 13
• Unscrew the air filter cover locking knob (A) and lift off the cover (B), exposing the air filter element (C). Remove the air
filter element locking nut (D) and cover (E), lift the air filter up and out.
NOTE:
The filter cartridge fits into the housing and is held in place with the air filter element cover and nut.
• Cleaning the air filter surfance can be done by lightly tapping the corner of the filter on a hard surface. If compressed air
has to be used, blow at low force from the inside of the filter.
NOTE:
Never clean with water or any type of solution.
INSTALLING AIR FILTER ELEMENT
• Place filter cartridge onto inlet manifold.
• Place air filter element cover on top of filter cartridge ensure that it is sitting correctly and sealing all the way around
the top of the cartridge.
• Screw down the cover nut, this will locate the cartridge and top cover.
• Replace the top air filter cover and screw in the locking knob.
NOTE:
When fitting the air filter cover there is no need for extreme force the cover will fall into place.
18
dealer.
®
(D) Air Filter
Element Lock Nut
(E) Air Filter
Element Cover
(C) Air Filter
(A) Cleaner Cover Knob
dealer.
®
Fig. 13
(B) Air Cleaner Cover
Hide quick links:
Advertisement
Table of Contents
