Advertisement

OPERATOR'S MANUAL
CHAINSAW
BRUZCS4210
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BRUZCS4210 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bushranger BRUZCS4210

  • Page 1 OPERATOR’S MANUAL CHAINSAW BRUZCS4210...
  • Page 2: Table Of Contents

    It is important for you to understand all safety precautions correctly before using your CS4210 chain saw. This chain saw is designed for cutting wood or wood products. Do not cut solid metal, sheet metal, plastic or any non-wood materials. If there is any clause in this manual that is hard to understand, please contact your Bushranger dealer.
  • Page 3: Personal Equipment

    Bushranger™ dealer. affect your vision, dexterity or judgement. dexterity or judgement. affect your vision, dexterity or judgement.
  • Page 4: Fuel

    SAFETY RULES & PRECAUTIONS PERSONAL EQUIPMENT (continued) • Clothing should be of sturdy, protective material. It should be snug-fitting to resist snagging, but roomy enough for freedom of movement. FUEL WARNING DANGER Petrol and Fuel are extremely flammable. IF spilled or ignited by source, it can cause fire and serious injury or property damage.
  • Page 5: Transportation

    supplies. •The fuel tank may be under p SAFETY RULES & PRECAUTIONS the fuel cap and wait for pres before removing the cap. TRANSPORTATION STARTING ENGINE presents dangers. •The fuel tank may be under pressure. Always loosen • When transporting your ch •...
  • Page 6: Repetitive Stress Injuries

    SAFETY RULES & PRECAUTIONS KICKBACK SAFETY (continued) • Use only replacement guide bars and chains specified by the manufacturer, or the acceptable equivalent of these guide bars and chains. OTHER SAFETY PRECAUTIONS - VIBRATION AND COLD • It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to cold and vibration.
  • Page 7 SAFETY RULES & PRECAUTIONS CUTTING • Use extreme caution when cutting small-size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance. • When cutting a limb that is under tension, be alert for spring-back so that you will not be struck by the limb or chain saw when the tension in the wood fibres is released.
  • Page 8: Parts Location

    DESCRIPTION...
  • Page 9 DESCRIPTION 1. OPERATOR’S MANUAL – Included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques. 2. FRONT HAND GUARD / CHAIN BRAKE LEVER – Guard between the front handle and the saw chain for protecting the hand from injuries and aiding in control of the chain saw if the hand slips off the handle.
  • Page 10: Installing Guide Bar And Saw Chain

    MOUNTING GUIDE BAR AND CHAIN BEFORE PER FORMING ANY OF THE FOLLOWING FOR YOUR OWN SAFETY, ALWAYS STOP THE ENGINE pointing in the correct direction). MOUNTING GUIDE BAR AND CHAIN MOUNTING GUIDE BAR AND CHAIN •Hold up bar nose and tighte •Hold up bar nose and tigh •...
  • Page 11 USING THE PRODUCT Fig. 7 STARTING THE COLD ENGINE • Fill the fuel tank with 2 stroke fuel. Fig. 7 - A. • Fill the chain oil tank with bar and chain lubricant. Fig. 7 - B. • Press hand guard forward. (Chain brake ACTIVATED position). •...
  • Page 12: Starting / Stopping The Engine

    • Squeeze throttle trigger gradually to increase engine revolution. USING THE PRODUCT • The chain starts moving when the engin reaches 3,800 r/min approximately. STARTING WITH A WARM ENGINE (continued) • Ensure proper acceleration and lubricati • Securely hold the chain saw. of saw chain and guide bar.
  • Page 13 Hold the chain just above a dry surface a more operators when working together • If the chain does not stop immediately, bring the saw to your Bushranger dealer to repair. area. Multiple operators - Keep a safe distance Check and repair ignition switch before starting the •Tension the chain as tight as possible, but so it can...
  • Page 14: Product Use Explanation

    USING THE PRODUCT NOTE (continued) • Do not increase engine revolution while the chain brake is engaged. • When using throttle latch at starting, keep the chain brake position. And after starting the engine, release the brake immediately. • Never test the brake in an area where petrol fumes are present. PRECAUTION •...
  • Page 15 in the cut to reach the hinge. (See figure D). hitting any obstacles. spiked bumper engaged, pivoting the saw Before cutting, clear the area around the tree. You will Before cutting, clear the area around the tree. You will Before cutting, clear the area around the tree. You will The position of this notch is important since the tree will car, a house, a fence a powerline or another tree.
  • Page 16 USING THE PRODUCT TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER...
  • Page 17: Service Guide / Trouble Shooting

    LISTED IN THE OPERATOR’S MANUAL SHOULD BE All chain saw service, other than items listed in the operator’s manual should be performed by your Bushranger LISTED IN THE OPERATOR’S MANUAL SHOULD BE LISTED IN THE OPERATOR’S MANUAL SHOULD BE...
  • Page 18: Maintenance Of Carburettor / Air Filter

    If you have any questions or troubles, please contact your Bushranger dealer. ® CARBURETTOR • Do not adjust the carburettor. If adjustment is required return the saw to your local Bushranger dealer. ® AIR FILTER • Check before every use.
  • Page 19 When starting, idle speed adjuster should be adjusted not to rotate the saw chain. When there is some trouble with the GUIDE BAR SPROCKET GUIDE BAR SPROCKE carburettor, contact your Bushranger dealer. ® small screw drive. - When th •...
  • Page 20: General Saw Maintenance

    • Cutting becomes difficult; • The cut is not straight; • Vibrations increase. A specialised Bushranger dealer will sharpen the chain using the right tools to ensure minimal removal of material and ® even sharpness on all cutting edges. If you sharpen the chain yourself, use special round-section files with the right diameter depending on the type of chain (see chain maintenance table).
  • Page 21 MAINTENANCE SAW CHAIN MAINTENANCE - SHARPENING THE CHAIN (continued) • Check that the depth gauge does not stick out further than the inspection instrument and file and projecting parts with a flat file, rounding off the edge. • After sharpening, remove all traces of filing and dust and lubricate the chain in an oil bath. Replace the chain whenever: •...
  • Page 22 MAINTENANCE BAR MAINTENANCE (continued) Fig. 12 Fig. 13 Fig. 14 Fig. 15...
  • Page 23: Storage

    MAINTENANCE LONG TERM STORAGE (OVER 60 DAYS) Do not store your unit for a prolonged period of time (60 days or longer) without performing protective storage maintenance which includes the following: a. Store unit in a dry, dust free place, out of the reach of children and other unauthorized persons. b.
  • Page 24: Specifications

    SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Model name CS4210 External dimensions: L x M x N 385x230x270 Dry weight: Saw without guide bar and chain Empty tanks Volume: Fuel tank cm³ Tank of chain lubrication oil cm³ Cutting length: usable cutting lengths of standard guide bar 16"(400) Saw Chain: Standard chain 050 gauge...
  • Page 25 NOTES...
  • Page 26 NOTES...
  • Page 27 NOTES...
  • Page 28 Copyright © Roy Gripske and Sons Pty. Ltd. 2018. All rights reserved. 1012. Images are for illustrative purposes only. Bushranger is a trademark of Roy Gripske & Sons Pty Ltd. PLP shall not be liable for technical or editorial errors or omissions ®...

Table of Contents