Bushranger BRUZCS5210 Operator's Manual page 16

USING THE PRODUCT
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN
TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN
TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TIMBER
TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN TENSION AND COMPRESSION IN
TENSION AND COMPRESSION IN TIMBER TENSION AND COMPRESSION IN
TENSION AND COMPRESSION IN TIMBER
TIMBER
TIMBER
A length of timber lying on the ground will be subject to
TIMBER TIMBER
TIMBER
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
TENSION AND COMPRESSION IN TIMBER A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be A length of timber lying on the ground will be
A length of timber lying on the ground will be
tension and compression depending at which points
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
A length of timber lying on the ground will be subject to
tension and compression depending at which points
tension and compression depending at which points
tension and compression depending at which points
tension and compression depending at which points
subject to tension and compression depending tension and compression depending at which points
tension and compression depending at which points
subject to tension and compression depending
tension and compression depending at which points A length of timber lying on the ground will be subject to
tension and compression depending at which points tension and compression depending at which points
tension and compression depending at which points tension and compression depending at which points
tension and compression depending at which points
subject to tension and compression depending
tension and compression depending at which points subject to tension and compression depending
tension and compression depending at which points subject to tension and compression depending
tension and compression depending at which points
tension and compression depending at which points
tension and compression depending at which points tension and compression depending at which points
tension and compression depending at which points tension and compression depending at which points tension and compression depending at which points
tension and compression depending at which points tension and compression depending at which points tension and compression depending at which points tension and compression depending at which points
tension and compression depending at which points
the major support is.
tension and compression depending at which points tension and compression depending at which points
at which points the major support is. tension and compression depending at which points
the major support is.
at which points the major support is.
tension and compression depending at which points the
the major support is.
the major support is.
the major support is.
the major support is. at which points the major support is. at which points the major support is.
the major support is. at which points the major support is.
the major support is.
the major support is. the major support is.
the major support is.
the major support is. the major support is.
the major support is.
the major support is.
the major support is.
the major support is. When timber is supported at its ends the
the major support is.
the major support is. the major support is.
the major support is. the major support is. the major support is.
the major support is. the major support is. the major support is. When timber is supported at its ends the
the major support is.
major support is.
When timber is supported at its ends the compression the major support is.
the major support is. When timber is supported at its ends the
the major support is. When timber is supported at its ends the
When timber is supported at its ends the
When timber is supported at its ends the compression
When timber is supported at its ends the compression
When timber is supported at its ends the compression
When timber is supported at its ends the compression
When timber is supported at its ends the compression
When timber is supported at its ends the compression
compression side is at the top and the tension
When timber is supported at its ends the compression
When timber is supported at its ends the compression When timber is supported at its ends the compression
When timber is supported at its ends the compression When timber is supported at its ends the compression
When timber is supported at its ends the compression compression side is at the top and the tension
When timber is supported at its ends the compression
When timber is supported at its ends the compression
When timber is supported at its ends the compression
When timber is supported at its ends the compression
compression side is at the top and the tension compression side is at the top and the tension
When timber is supported at its ends the compression When timber is supported at its ends the compression compression side is at the top and the tension
When timber is supported at its ends the compression When timber is supported at its ends the compression
When timber is supported at its ends the compression When timber is supported at its ends the compression When timber is supported at its ends the compression
When timber is supported at its ends the compression When timber is supported at its ends the compression
When timber is supported at its ends the compression
When timber is supported at its ends the compression
side is at the top and the tension side is at the bottom. When timber is supported at its ends the compression
When timber is supported at its ends the compression
side is at the top and the tension side is at the bottom.
side is at the bottom. To cut between these
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom. side is at the bottom. To cut between these
side is at the top and the tension side is at the bottom. When timber is supported at its ends the compression
side is at the bottom. To cut between these
side is at the bottom. To cut between these
side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom. side is at the bottom. To cut between these
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom. side is at the top and the tension side is at the bottom.
support points make the first cut downwards
side is at the top and the tension side is at the bottom. support points make the first cut downwards side is at the top and the tension side is at the bottom.
To cut between these support points make the first cut side is at the top and the tension side is at the bottom.
side is at the top and the tension side is at the bottom.
To cut between these support points make the first cut
support points make the first cut downwards support points make the first cut downwards
support points make the first cut downwards
To cut between these support points make the first cut
To cut between these support points make the first cut To cut between these support points make the first cut
To cut between these support points make the first cut
To cut between these support points make the first cut
To cut between these support points make the first cut To cut between these support points make the first cut
To cut between these support points make the first cut
To cut between these support points make the first cut To cut between these support points make the first cut
To cut between these support points make the first cut approximately 1/3rd the timber diameter. To cut between these support points make the first cut
To cut between these support points make the first cut
To cut between these support points make the first cut
To cut between these support points make the first cut approximately 1/3rd the timber diameter.
To cut between these support points make the first cut
To cut between these support points make the first cut To cut between these support points make the first cut
To cut between these support points make the first cut To cut between these support points make the first cut To cut between these support points make the first cut To cut between these support points make the first cut
To cut between these support points make the first cut To cut between these support points make the first cut To cut between these support points make the first cut approximately 1/3rd the timber diameter.
To cut between these support points make the first cut approximately 1/3rd the timber diameter.
approximately 1/3rd the timber diameter.
To cut between these support points make the first cut
To cut between these support points make the first cut
downwards approximately 1/3rd the timber diameter. To cut between these support points make the first cut
downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
The second cut is made upwards and should downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter.
The second cut is made upwards and should
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. The second cut is made upwards and should
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter. The second cut is made upwards and should The second cut is made upwards and should
downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter. downwards approximately 1/3rd the timber diameter.
downwards approximately 1/3rd the timber diameter.
The second cut is made upwards and should meet the meet the first cut.
The second cut is made upwards and should meet the meet the first cut.
The second cut is made upwards and should meet the The second cut is made upwards and should meet the The second cut is made upwards and should meet the meet the first cut.
The second cut is made upwards and should meet the meet the first cut.
The second cut is made upwards and should meet the meet the first cut.
The second cut is made upwards and should meet the
The second cut is made upwards and should meet the The second cut is made upwards and should meet the The second cut is made upwards and should meet the
The second cut is made upwards and should meet the
The second cut is made upwards and should meet the The second cut is made upwards and should meet the
The second cut is made upwards and should meet the
The second cut is made upwards and should meet the
The second cut is made upwards and should meet the
The second cut is made upwards and should meet the The second cut is made upwards and should meet the
When the timber is supported at one end only The second cut is made upwards and should meet the
The second cut is made upwards and should meet the The second cut is made upwards and should meet the
The second cut is made upwards and should meet the The second cut is made upwards and should meet the The second cut is made upwards and should meet the The second cut is made upwards and should meet the When the timber is supported at one end only
The second cut is made upwards and should meet the
The second cut is made upwards and should meet the
The second cut is made upwards and should meet the
first cut.When the timber is supported at one end only The second cut is made upwards and should meet the When the timber is supported at one end only
The second cut is made upwards and should meet the When the timber is supported at one end only
first cut. When the timber is supported at one end only
first cut.
first cut. first cut.
first cut.
first cut.
first cut.
make the first cut upwards approximately 1/3rd first cut.
first cut. first cut.
first cut. make the first cut upwards approximately 1/3rd
first cut. first cut.
first cut.
first cut.
first cut. make the first cut upwards approximately 1/3rd
make the first cut upwards approximately 1/3rd the timber make the first cut upwards approximately 1/3rd
first cut. first cut. first cut. make the first cut upwards approximately 1/3rd
first cut.
first cut. first cut. first cut.
first cut. first cut.
first cut.
first cut.
first cut.
first cut. first cut.
When the timber is supported at one end only make the
When the timber is supported at one end only make the
the timber diameter. The second cut is made
the timber diameter. The second cut is made
When the timber is supported at one end only make the When the timber is supported at one end only make the
When the timber is supported at one end only make the
When the timber is supported at one end only make the When the timber is supported at one end only make the
the timber diameter. The second cut is made
diameter. The second cut is made downwards and should the timber diameter. The second cut is made
the timber diameter. The second cut is made
When the timber is supported at one end only make the
When the timber is supported at one end only make the When the timber is supported at one end only make the
When the timber is supported at one end only make the
When the timber is supported at one end only make the When the timber is supported at one end only make the
When the timber is supported at one end only make the
When the timber is supported at one end only make the
When the timber is supported at one end only make the
When the timber is supported at one end only make the
When the timber is supported at one end only make the When the timber is supported at one end only make the
When the timber is supported at one end only make the When the timber is supported at one end only make the
When the timber is supported at one end only make the When the timber is supported at one end only make the
When the timber is supported at one end only make the When the timber is supported at one end only make the When the timber is supported at one end only make the
When the timber is supported at one end only make the
downwards and should meet the first cut.
When the timber is supported at one end only make the
downwards and should meet the first cut. When the timber is supported at one end only make the
When the timber is supported at one end only make the
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber downwards and should meet the first cut. downwards and should meet the first cut.
meet the first cut. downwards and should meet the first cut.
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
first cut upwards approximately 1/3rd the timber
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and diameter. The second cut is made downwards and diameter. The second cut is made downwards and
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and CAUTION
CAUTION
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and diameter. The second cut is made downwards and
diameter. The second cut is made downwards and CAUTION
diameter. The second cut is made downwards and CAUTION
diameter. The second cut is made downwards and CAUTION
diameter. The second cut is made downwards and diameter. The second cut is made downwards and
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and CAUTION
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and diameter. The second cut is made downwards and
diameter. The second cut is made downwards and diameter. The second cut is made downwards and diameter. The second cut is made downwards and
diameter. The second cut is made downwards and diameter. The second cut is made downwards and
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and
diameter. The second cut is made downwards and diameter. The second cut is made downwards and
diameter. The second cut is made downwards and
should meet the first cut.
should meet the first cut.
If you have misjudged the effects of tension and
should meet the first cut. If you have misjudged the effects of tension and
should meet the first cut. should meet the first cut.
should meet the first cut. should meet the first cut.
If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and
If you have misjudged the effects of tension and should meet the first cut.
should meet the first cut. should meet the first cut.
should meet the first cut. should meet the first cut.
should meet the first cut.
should meet the first cut. should meet the first cut.
should meet the first cut.
should meet the first cut.
should meet the first cut.
should meet the first cut. should meet the first cut. should meet the first cut. should meet the first cut.
should meet the first cut.
should meet the first cut. should meet the first cut.
should meet the first cut.
should meet the first cut.
should meet the first cut.
compression, and cut from the wrong side, the should meet the first cut.
should meet the first cut. compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
timber will pinch the guide bar and chain, timber will pinch the guide bar and chain,
timber will pinch the guide bar and chain,
timber will pinch the guide bar and chain, timber will pinch the guide bar and chain,
timber will pinch the guide bar and chain, trapping it.
trapping it. Racing the engine with the chain
trapping it. Racing the engine with the chain
trapping it. Racing the engine with the chain
trapping it. Racing the engine with the chain
trapping it. Racing the engine with the chain
CAUTION CAUTION
Racing the engine with the chain jammed will burn out
CAUTION CAUTION
CAUTION CAUTION CAUTION
CAUTION
CAUTION
CAUTION CAUTION CAUTION
jammed will burn out your clutch. jammed will burn out your clutch.
CAUTION CAUTION
CAUTION CAUTION
CAUTION
CAUTION CAUTION
CAUTION CAUTION jammed will burn out your clutch.
CAUTION CAUTION jammed will burn out your clutch.
CAUTION CAUTION jammed will burn out your clutch.
CAUTION
your clutch. CAUTION
CAUTION
CAUTION
CAUTION
If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and If the chain should become jammed and the saw If you have misjudged the effects of tension and If the chain should become jammed and the saw
If the chain should become jammed and the saw
If you have misjudged the effects of tension and If the chain should become jammed and the saw
If you have misjudged the effects of tension and If the chain should become jammed and the saw
If you have misjudged the effects of tension and If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and
If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and If you have misjudged the effects of tension and
If you have misjudged the effects of tension and
can not be removed from the cut do not force
can not be removed from the cut do not force
compression, and cut from the wrong side, the compression, and cut from the wrong side, the
can not be removed from the cut do not force
can not be removed from the cut do not force
can not be removed from the cut do not force
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the compression, and cut from the wrong side, the If the chain should become jammed and the saw compression, and cut from the wrong side, the
compression, and cut from the wrong side, the compression, and cut from the wrong side, the
compression, and cut from the wrong side, the compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the compression, and cut from the wrong side, the compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
it out. Stop the saw, force a wedge into the cut compression, and cut from the wrong side, the compression, and cut from the wrong side, the it out. Stop the saw, force a wedge into the cut
compression, and cut from the wrong side, the compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the compression, and cut from the wrong side, the compression, and cut from the wrong side, the
compression, and cut from the wrong side, the
compression, and cut from the wrong side, the it out. Stop the saw, force a wedge into the cut it out. Stop the saw, force a wedge into the cut
compression, and cut from the wrong side, the it out. Stop the saw, force a wedge into the cut
compression, and cut from the wrong side, the
can not be removed from the cut do not force it out.
timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it.
to open it up. Never force the saw when it is
to open it up. Never force the saw when it is timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
to open it up. Never force the saw when it is
timber will pinch the guide bar and chain, trapping it. to open it up. Never force the saw when it is
timber will pinch the guide bar and chain, trapping it. to open it up. Never force the saw when it is
timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it. Stop the saw, force a wedge into the cut to open it up. timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it. timber will pinch the guide bar and chain, trapping it.
timber will pinch the guide bar and chain, trapping it.
Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn jammed. Do not force the saw into the cut.
jammed. Do not force the saw into the cut.
Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn jammed. Do not force the saw into the cut. jammed. Do not force the saw into the cut.
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn jammed. Do not force the saw into the cut.
Racing the engine with the chain jammed will burn
Never force the saw when it is jammed. Do not force the Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn A dull chain is unsafe and will cause excessive
Racing the engine with the chain jammed will burn Racing the engine with the chain jammed will burn
A dull chain is unsafe and will cause excessive Racing the engine with the chain jammed will burn
Racing the engine with the chain jammed will burn
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
out your clutch.
out your clutch.
saw into the cut. A dull chain is unsafe and will cause
out your clutch.
out your clutch. out your clutch. out your clutch.
out your clutch.
out your clutch. out your clutch.
out your clutch. out your clutch.
out your clutch.
wear to the cutting attachments.
out your clutch. wear to the cutting attachments.
out your clutch. out your clutch. out your clutch. out your clutch.
out your clutch.
out your clutch. out your clutch. wear to the cutting attachments. wear to the cutting attachments.
out your clutch. wear to the cutting attachments.
out your clutch. out your clutch.
out your clutch. out your clutch.
out your clutch. out your clutch.
out your clutch.
out your clutch.
excessive wear to the cutting attachments. A good way to out your clutch.
If the chain should become jammed and the saw
If the chain should become jammed and the saw
A good way to tell when the chain is dull is when
If the chain should become jammed and the saw If the chain should become jammed and the saw
If the chain should become jammed and the saw A good way to tell when the chain is dull is when If the chain should become jammed and the saw
If the chain should become jammed and the saw
A good way to tell when the chain is dull is when
If the chain should become jammed and the saw A good way to tell when the chain is dull is when
If the chain should become jammed and the saw A good way to tell when the chain is dull is when
If the chain should become jammed and the saw If the chain should become jammed and the saw
If the chain should become jammed and the saw
If the chain should become jammed and the saw
If the chain should become jammed and the saw
If the chain should become jammed and the saw tell when the chain is dull is when fine saw dust comes If the chain should become jammed and the saw If the chain should become jammed and the saw
If the chain should become jammed and the saw
If the chain should become jammed and the saw If the chain should become jammed and the saw
If the chain should become jammed and the saw
If the chain should become jammed and the saw If the chain should become jammed and the saw If the chain should become jammed and the saw
If the chain should become jammed and the saw If the chain should become jammed and the saw
If the chain should become jammed and the saw
If the chain should become jammed and the saw If the chain should become jammed and the saw
If the chain should become jammed and the saw
fine saw dust comes out instead of chips.
fine saw dust comes out instead of chips.
can not be removed from the cut do not force it out. fine saw dust comes out instead of chips. fine saw dust comes out instead of chips.
fine saw dust comes out instead of chips.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out. can not be removed from the cut do not force it out. can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
out instead of chips.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out. can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out. can not be removed from the cut do not force it out. can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out. can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out. can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out. can not be removed from the cut do not force it out. can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out. can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
can not be removed from the cut do not force it out.
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
CAUTION
Stop the saw, force a wedge into the cut to open it
CAUTION Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it CAUTION
Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it CAUTION CAUTION
Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it Stop the saw, force a wedge into the cut to open it
Stop the saw, force a wedge into the cut to open it
up.
CAUTION
up.
up.
up. up.
up.
up.
up. up. up. Do not touch hot surfaces of cylinder cover and
up.
up. Do not touch hot surfaces of cylinder cover and
up.
up. Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
up. up. Do not touch hot surfaces of cylinder cover and
up. up.
up.
up. up.
up. up.
up. up.
up. up.
up. up.
up.
Do not touch hot surfaces of cylinder cover and silencer,
Never force the saw when it is jammed.
silencer, after you have used the chain saw.
Never force the saw when it is jammed.
silencer, after you have used the chain saw.
Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed. silencer, after you have used the chain saw.
Never force the saw when it is jammed. silencer, after you have used the chain saw.
Never force the saw when it is jammed. silencer, after you have used the chain saw.
Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed.
Never force the saw when it is jammed.
Never force the saw when it is jammed.
Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed.
after you have used the chain saw. Never force the saw when it is jammed. Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed. Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed.
Never force the saw when it is jammed. Never force the saw when it is jammed.
Never force the saw when it is jammed.
Never force the saw when it is jammed.
Do not force the saw into the cut.
Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut.
Do not force the saw into the cut.
Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut.
Do not force the saw into the cut.
Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut.
Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut.
Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut. Do not force the saw into the cut. WARNING DANGER
Do not force the saw into the cut.
Do not force the saw into the cut. Do not force the saw into the cut. Do not force the saw into the cut.
WARNING DANGER Do not force the saw into the cut.
WARNING DANGER
WARNING DANGER
WARNING DANGER
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
WARNING
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive Never use throttle latch for cutting jobs.
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive Never use throttle latch for cutting jobs. A dull chain is unsafe and will cause excessive
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive Never use throttle latch for cutting jobs.
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive Never use throttle latch for cutting jobs.
A dull chain is unsafe and will cause excessive A dull chain is unsafe and will cause excessive Never use throttle latch for cutting jobs.
A dull chain is unsafe and will cause excessive
wear to the cutting attachments.
Never use throttle latch for cutting jobs.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments.
wear to the cutting attachments.
wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments. wear to the cutting attachments.
wear to the cutting attachments. wear to the cutting attachments.
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine A good way to tell when the chain is dull is when fine
A good way to tell when the chain is dull is when fine
saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips.
saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips. saw dust comes out instead of chips.
saw dust comes out instead of chips. saw dust comes out instead of chips. saw dust comes out instead of chips.
CAUTION
CAUTION CAUTION
CAUTION CAUTION
CAUTION
CAUTION CAUTION CAUTION
CAUTION
CAUTION
CAUTION
CAUTION CAUTION CAUTION
CAUTION
CAUTION CAUTION
CAUTION
CAUTION CAUTION
CAUTION
CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION
CAUTION CAUTION
Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
Do not touch hot surfaces of cylinder cover and Do not touch hot surfaces of cylinder cover and
silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw. silencer, after you used the chain saw. silencer, after you used the chain saw. silencer, after you used the chain saw.
silencer, after you used the chain saw.
WARNING ▲ DANGER
16
WARNING ▲ DANGER
WARNING ▲ DANGER
WARNING ▲ DANGER WARNING ▲ DANGER
WARNING ▲ DANGER
16 16 WARNING ▲ DANGER
16 16 WARNING ▲ DANGER
WARNING ▲ DANGER WARNING ▲ DANGER
WARNING ▲ DANGER
WARNING ▲ DANGER
WARNING ▲ DANGER WARNING ▲ DANGER
WARNING ▲ DANGER WARNING ▲ DANGER WARNING ▲ DANGER
WARNING ▲ DANGER
16
WARNING ▲ DANGER
WARNING ▲ DANGER
WARNING ▲ DANGER WARNING ▲ DANGER WARNING ▲ DANGER
WARNING ▲ DANGER WARNING ▲ DANGER WARNING ▲ DANGER
WARNING ▲ DANGER WARNING ▲ DANGER WARNING ▲ DANGER
WARNING ▲ DANGER
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB. NEVER USE THROTTLE LATCH FOR CUTTING JOB.
NEVER USE THROTTLE LATCH FOR CUTTING JOB.