Ingesting Dcp; Ingesting From Hdd Via Usb Connector - Sony SRX-R815P Operating Instructions Manual

Ingesting DCP

This procedure ingests DCP, such as the main feature to be
screened, or previews, to the server.
Notes
• When DCP is encrypted, the KDM encryption key file is
necessary.
• Depending on the USB HDD type being used, the
following messages may be displayed on the center of
the screen. These do not indicate problems.
"Unable to mount Audio Disc"
"Unable to mount Utility_**USB HDD model
number**"
For details on ingesting KDM, see "Ingesting KDM"
(page 23).
Note
When ingesting DCP/KDM, be sure to do so with the
power switches on the server and projector set to on. In
such cases, be sure to verify that the IMB indicator on the
main projector is lit green.
DCP can be ingested in the following ways.
• Ingesting from HDD via USB Connector (page 21)
• Ingesting from HDD via CRU DATAPORT (page 22)
• Ingesting via Network (page 23)
Ingesting from HDD via USB
Connector
Caution
Do not start up the server with a USB device inserted in
INGEST PORT1/2 connector on the front of the server.
The USB device may not be recognized.
1
Connect the HDD containing the DCP to the server's
INGEST PORT 1/2 connector.
2
Tap the [Library] tab, and then tap [Library].
The "Library" screen will be displayed.
3
In the [External Folder] pane, select the following
terminals connected to the HDD, and then tap [Open].
• When connected to INGEST PORT 1 terminal,
select [Ingest_USB_1].
• When connected to INGEST PORT 2 terminal,
select [Ingest_USB_2].
The content inside the HDD connected to INGEST
PORT 1/2 will be displayed.
However, folders with the following character strings
(regardless of case) will not appear.
bin, boot, dev, etc, home, initrd, lib, misc, opt, proc,
root, sbin, selinux, srv, tmp, sys, usr, var
4
Select the DCP (
Notes
• Select the CPL (
to ingest the selected CPL only as new DCP.
• To refresh the displayed content, tap
The selected DCP will be ingested into the server.
Tap [OK] to close the message.
5
To continue ingesting multiple DCPs, repeat step 4.
The DCP ingest request will be registered as the
following job.
21
) to ingest, and then tap [Ingest].
) within DCP and tap [Ingest]
.