Advertisement
Operation panel
b
A
LIGHT
ON
OFF
ENG
a
ENG
control
PROD
control
ENG
PROD
MIC LINE switch
TRACKER control
a INTERCOM controls and switches
ENG control, PROD control, PGM1 control, PGM2 control,
MIC LINE switch, TRACKER control, and LEVEL switch for
the intercom.
ENG (engineer line) control
Adjust the intercom audio listening level of the engineer line.
PROD (producer line) control
Adjust the intercom audio listening level of the producer line.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
MIC LINE (intercom microphone line) switch
Select the intercom line.
PROD: Use the producer line.
ENG: Use the engineer line.
OFF: Turn the intercom headset microphone off.
TRACKER control
Adjust the intercom audio listening level of an intercom
connected to the TRACKER connector (page 10).
LEVEL switch
REAR: The intercom audio listening level is adjusted with
the controls on the operation panel.
FNT: The intercom audio listening level is adjusted with
the INTERCOM LEVEL control (page 8) on the front
of the camera.
c
d
RET/ASSIGNABLE
B
C
DISP
MENU
PROD
PGM1
PGM2
MIC
LEVEL
TRACKER
PROD
LINE
REAR
OFF
ENG
FNT
PGM2
control
PGM1
control
PGM1
PGM2
MIC
TRACKER
LEVEL
PROD
LINE
REAR
OFF
ENG
FNT
INTERCOM
LEVEL switch
b LIGHT switch
Set to ON to illuminate the operation panel.
c RET/ASSIGNABLE button A, B
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
d RET/ASSIGNABLE button C / DISP/MENU switch
Press the button to switch the function assigned to the button
on the <REAR FUNCTION ASSIGN> page on/off. When the
return function is assigned, press the button to display the
return video signal on the viewfinder screen while the button is
pressed.
Turn the button to change the assigned function setting. When
the return function is assigned, you can change the return
signal channel.
When the DISP/MENU switch is set to the MENU position to
display the MENU screen, you can perform menu operations
using RET/ASSIGNABLE button C.
Connector panel
a
b
c
RET CTRL
FRONT MIC
d
LINE
MIC
DC IN 10.5-17V
e
a EARPHONE jack (4-pole mini jack)
Connect to a headset, or earphones with microphone (3-pole/
4-pole earphones), to input/output the intercom audio signal.
For 4-pole earphones, the intercom line is linked to the
INTERCOM setting.
Turn the microphone function on/off using HEADSET MIC
(page 38) in the OPERATION menu. When set to ON, the
microphone can be turned on/off in conjunction with the
INTERCOM setting using the MIC LINE switch on the
operation panel. The default setting is OFF.
9
REMOTE
DC OUT
EARPHONE
TRACKER
PROMPTER
/GEN
LOCK
AES/EBU
LINE
MIC
TEST
+48V
+48V
OFF
OFF
OUT
AUDIO IN
CH1
CH2
SDI
MONI
l
f
g
h
i
j
k
Advertisement
