Advertisement
OPERATION
Page title
Item
Page No.
<FOCUS POSITION
ADJUSTED SIGN
METER2>
06
MARKER CONFIG
CURRENT FOCUS
DIST
<FOCUS ASSIST>
INDICATOR
07 (U03)
AREA MARKER
<ZEBRA>
ZEBRA
08 (U08)
ZEBRA1
ZEBRA2
Settings
SENSE
1 to 5, 2
NAME DISP
OFF, 1S, 3S, 5S, ON
FRAME DISP
OFF, 1S, 3S, 5S, ON
FRAME WIDTH
1 to 5, 2
[REG] MKR1, 2, 3 Execute via ENTER.
[DISP] MKR1, 2, 3 OFF, ON
[COLOR] MKR1,
RED, GREEN, BLUE, YELLOW,
2, 3
ORANGE, PURPLE, GRAY,
BLACK, WHITE
[NAME] MKR1, 2,
Up to 8 characters (default setting:
3
MARKER 1 to 3)
[POS] MKR1, 2, 3 0 to 999
ON, OFF
MODE
BOX, B&W, COL
BTM, LEFT, TOP, RIGHT
LEVEL
MIN, 0 to 10, 4
QUICK, SMOOTH
GAIN
0 to 99, 50
OFFSET
0 to 99, 50
ON, OFF
SIZE
SMALL, MIDDLE, LARGE
POSITION
LEFT, CENTER, RIGHT
POSITION H
0 to 99, 50
POSITION V
0 to 99, 50
ON, OFF
1, 2, 1&2
LEVEL
50 to 109%, 70%
WIDTH
0 to 30%, 10%
50 to 109%, 100%
Description
Sets the sensitivity for the ADJUST decision.
The higher the value, the higher the sensitivity.
Displays/hides Marker Name, and sets the display
time.
Displays/hides Adjust Frame, and sets the display
time.
Sets the width of Adjust Frame.
Registers the marker on the current focus position.
(This item is not available when the marker
registering operation is assigned to the dedicated
switch.)
Displays/hides the marker. (This item is not
available when the marker registering operation is
assigned to the dedicated switch.)
Sets the color for the triangular area of the marker.
Sets the character of Marker Name.
See "To specify a character string" on page 23.
Sets the position of Marker.
Displays the current focus distance (display only).
34
Advertisement
