Advertisement
OPERATION
Page title
Item
Page No.
<EXT SWITCH>
RET CTRL
CONNECTOR
16
<RETURN>
RET1 SW SEL
17
RET2 SW SEL
RET3 SW SEL
RET1 SW + RET2 SW RET1 SW, RET3 SW
<HEADSET MIC>
INTERCOM
18 (U11)
EARPHONE
Settings
RET1 Pin5:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
RET2 Pin6:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
RET3 Pin4:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
INCOM1 Pin1:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
INCOM2 Pin2:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, ENG, PROD,
EXTENDER, D.EXTENDER,
5600K, VF DETAIL, SPIRIT
LEVEL, FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
CCU RET1, CCU RET2,
CCU RET3, CCU RET4
CCU RET1, CCU RET2,
CCU RET3, CCU RET4
DYNAMIC, CARBON, MANUAL
LEVEL
–60 dBu, –50 dBu, –40 dBu,
–30 dBu,–20 dBu, (–60 dBu),
(–50 dBu), (–40 dBu), (–30 dBu),
(–20 dBu)
–6, 0, 6 dBu
POWER
ON, OFF, (ON), (OFF)
UNBAL
ON, OFF, (ON), (OFF)
ON, OFF
LEVEL
–34 dBu, –40 dBu, –46 dBu
Description
This function works when each pin of the RET CTRL
connector contacts with GND (Pin3).
TALLY R, G, Y are available only when using the
camera as a standalone device, and make the tally
lamp light. VTR S/S is available only when using the
camera as a standalone device, and makes the R
tally lamp light.
VTR S/S signal is embedded in the video.
Varies based on the RET1 button setting.
Varies based on the RET2 button setting.
Changes operation when you press both the RET1
button and RET2 button at the same time.
RET1 SW: The two buttons function as the RET1
button.
RET3 SW: The two buttons function as the RET3
button.
Settings in ( ): With DYNAMIC or CARBON (cannot
be changed)
Input gain
Settings in ( ): With DYNAMIC or CARBON (cannot
be changed)
Settings in ( ): With CARBON (cannot be changed)
38
Advertisement
