Advertisement
MAINTENANCE
Page title
Item
Page No.
<LENS2>
REMOTE CONTROL
M07
FOLLOW FOCUS
<MIC GAIN>
MIC1
M08
MIC2
<CAMERA NUMBER>
CAMERA NUMBER
M09
<CALL/TALLY>
CCU CALL
M10
CAM CALL
TALLY GUARD
<OUTPUT FORMAT>
CURRENT
M11 (U12)
<TEST OUT>
OUTPUT
M12 (U13)
VBS-OUT
DOWN CONVERTER
SYNC-OUT
Settings
OFF, ON, (OFF)
CONTROL
ZOOM&FOCUS, FOCUS,
MODE
FOLLOW FOCUS
OFFSET ADJUST
1, 2, 3, 4, 5
SENS
OFFSET
1, 2, 3, 4, 5
CANCEL GAIN
20, 30, 40, 50, 60 dB
20, 30, 40, 50, 60 dB
---, 1 to 96
CCU LINK
OFF, ON
OFF, ON
OFF, ON
EXTENDER
OFF, ON
FILTER DISC
OFF, ON
1080: 59.94i, 50i
720: 59.94P, 50P
SD-SYNC, HD-SYNC, VBS
CHARACTER
ON, OFF
GAIN
–99 to +99, 0
CHROMA
–99 to +99, 0
SELECT
MAIN, RET, VF
ASPECT
SQ, EC
V-PHASE
–999 to +999, 0
H-PHASE
–999 to +999, 0
Description
Lens remote control from MSU/RCP on/off setting.
Same function as the Active button on the Zoom/
Focus Control screen of the MSU/RCP.
(OFF): When lens is not supported
ZOOM & FOCUS: Control ZOOM and FOCUS from
an MSU/RCP (control by lens demand is not
supported)
FOCUS: Control FOCUS from an MSU/RCP. ZOOM
is controlled by lens demand.
FOLLOW FOCUS: FOCUS is controlled by lens
demand, but can be adjusted (offset fine
adjustment) from an MSU/RCP. ZOOM is
controlled by lens demand.
Note
Settings other than FOLLOW FOCUS cannot be
modified when the offset is not 0 and REMOTE
CONTROL is OFF. To change settings, set
REMOTE CONTROL to ON.
Sets the sensitivity of superimposing the offset of
the MSU.
Sets the sensitivity of canceling the offset on the
demand side.
Can be modified only in standalone operation.
Sets the camera number.
Turns the link with the CCU No. on/off.
When on, you can set the camera number from the
CCU.
Selects whether TALLY lights for CALL signal.
Selects whether to prevent changes while TALLY is
lit.
Displays the current format.
Only 1080:59.94P, 50P displayed when the
HDC3170 is connected to a CCU.
1080:59.94P, 50P are displayed in addition to the
settings on the left when the HDC3170 is operating
in standalone mode.
OUTPUT is displayed during VBS.
OUTPUT is displayed for VBS.
OUTPUT is displayed during SD-SYNC and
HD-SYNC.
45
Advertisement
