Advertisement
For the items on each page, see the corresponding source
menu page in the table in "Menu List" on page 27.
The USER MENU CUSTOMIZE menu allows you to configure
a USER menu that consists only of pages and items that you
need, by your adding, deleting or replacing pages.
Editing by items
The USER MENU CUSTOMIZE menu allows you to add a
new page to the USER menu and add desired items to the
page.
While the EDIT page contains factory-preset items, the USER
1 EDIT to USER 19 EDIT pages are all blank in their initial
state. You can register up to 10 items, including blank lines, on
each of these pages.
To add items to a page
Proceed as follows.
1
Set the DISPLAY switch from the OFF position to the
MENU position while holding the MENU SEL knob/
ENTER button pressed.
The TOP MENU screen appears.
2
Turn the MENU SEL knob/ENTER button to move the
arrow marker (
) to "USER MENU CUSTOMIZE" then
,
push on the MENU SEL knob/ENTER button.
If this is the first time the USER MENU CUSTOMIZE
menu has been displayed, the CONTENTS page of the
menu appears.
CONTENTS
xx
01.EDIT PAGE
02.USER 1 EDIT
03.USER 2 EDIT
c
04.USER 3 EDIT
05.USER 4 EDIT
06.USER 5 EDIT
07.USER 6 EDIT
08.USER 7 EDIT
09.USER 8 EDIT
10.USER 9 EDIT
If the USER MENU CUSTOMIZE menu has been used
before, the page last accessed appears.
3
If the CONTENTS page is displayed, turn the MENU
SEL knob/ENTER button to move the arrow marker
(
) to any of USER 1 EDIT to USER 19 EDIT then push
,
on the MENU SEL knob/ENTER button to display the
page.
If a different page is displayed, turn the MENU SEL
knob/ENTER button until the desired page appears,
then push on the MENU SEL knob/ENTER button to
select the page.
Example: When you select the USER 2 EDIT page
USER 2 EDIT
c
E00
TOP
E03
TOP
4
Move the arrow marker (
(this operation is unnecessary if no item exists on the
page, as shown in the figure for step 3) then push on
the MENU SEL knob/ENTER button.
The EDIT FUNCTION screen appears.
INSERT
c
MOVE
DELETE
BLANK
5
Move the arrow marker (
the MENU SEL knob/ENTER button.
The page with the last item added appears.
<SW STATUS>
FLARE
GAMMA
BLK GAM : OFF
KNEE
WHT CLIP:
DETAIL
LVL DEP :
SKIN DTL: OFF
MATRIX
6
Add the items.
1 Turn the MENU SEL knob/ENTER button until the
page that has the desired items appears then push on
the MENU SEL knob/ENTER button.
2 Turn the MENU SEL knob/ENTER button to move the
arrow marker (,) to the desired item then push on the
MENU SEL knob/ENTER button.
The USER 2 EDIT page appears again, displaying the
newly added item.
7
Add the remaining items by repeating steps 4 to 6.
You can add up to 10 items on one page.
To delete items from a page
Proceed as follows:
1
Move the arrow marker (
and push on the MENU SEL knob/ENTER button.
The EDIT FUNCTION screen appears.
2
Select "DELETE," and push on the MENU SEL knob/
ENTER button.
The previously displayed page appears again, and the
message "DELETE OK? YES
right.
3
To delete, turn the MENU SEL knob/ENTER button to
move the arrow marker (
MENU SEL knob/ENTER button.
To change the order of items on a page
Proceed as follows:
1
Turn the MENU SEL knob/ENTER button to move the
arrow marker (
,
on the MENU SEL knob/ENTER button.
The EDIT FUNCTION screen appears.
24
) to the item to be added
,
EDIT FUNCTION
ESC
) to "INSERT" and push on
,
P01
ESC
:
ON
c
:
ON
:
ON
ON
:
ON
ON
: OFF
) to the item to be deleted,
,
NO" appears at the upper
,
) to "YES," and push on the
,
) to the item to be moved then push
Advertisement
