Advertisement
OPERATION
Page title
Item
Page No.
<SWITCH ASSIGN2>
LENS VTR S/S
14 (U10)
FRONT RET1
FRONT RET2
HANDLE SW1
HANDLE SW2
<REAR FUNCTION
A PUSH
ASSIGN>
B PUSH
15
C PUSH
A ROT
B ROT
C ROT
Settings
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, VTR S/S
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, D.EXTENDER
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, D.EXTENDER,
VTR S/S
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, ZOOM(T), VTR
S/S
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, ZOOM(W)
ZOOM SPEED
0 to 99, 20
RETURN1 CAM SW, RETURN1
CAM SW TOGGLE, RETURN2
CAM SW, RETURN2 CAM SW
TOGGLE, RETURN3 CAM SW,
RETURN3 CAM SW TOGGLE,
VF DETAIL, FOCUS POSITION
METER, FOCUS POSITION
METER MKR1 REG, FOCUS
POSITION METER MKR2 REG,
FOCUS POSITION METER MKR3
REG, FOCUS ASSIST
INDICATOR
RET CCU CH SEL, VF DETAIL
LEVEL, VF DETAIL CRISP,
FOCUS ASSIST IND GAIN
Description
Assigns a function to the VTR START/STOP switch
on the mounted lens.
VTR S/S is available only when using the
camcorder as a stand-alone device, and adds the
REC signal to the SDI signal. Pressing this button
repeatedly, toggles recording on/off. While
recording, the tally lamp lights in red.
Assigns functions executed when you press RET/
ASSIGNABLE buttons A, B, and C.
Default values
When A PUSH is selected: RETURN1 CAM SW.
When B PUSH is selected: RETURN2 CAM SW.
When C PUSH is selected: RETURN3 CAM SW.
Assigns functions executed when you turn RET/
ASSIGNABLE buttons A, B, and C.
The items that can be selected vary depending on
the A PUSH, B PUSH, and C PUSH settings.
When the PUSH function is OFF: OFF
When RETURN1 CAM SW, RETURN1 CAM SW
TOGGLE, RETURN2 CAM SW, RETURN2
CAM SW TOGGLE, RETURN3 CAM SW,
RETURN3 CAM SW TOGGLE, FOCUS
POSITION METER, FOCUS POSITION
METER MKR1 REG, FOCUS POSITION
METER MKR2 REG, FOCUS POSITION
METER MKR3 REG is selected: RET CCU CH
SEL
When VF DETAIL is selected: VF DETAIL LEVEL
or VF DETAIL CRISP
When FOCUS ASSIST INDICATOR is selected:
FOCUS ASSIST IND GAIN
37
Advertisement
