Date & Time - Carl Valentin Compa II 103/8 T Quick Reference Manual

Compa II
Drive mapping
Key:
PJL (Printer Job Language)
Date & Time
Keys: , , ,
Set date and time
Key:
Summertime
Key:
Start of summertime
(format)
Key:
Start of summertime (date)
Key:
Start of summertime (time)
Key:
End of summertime
(format)
Key:
End of summertime (date)
Key:
End of summertime (time)
Key:
Time shifting
112
®
The access to Zebra drives is rerouted to the corresponding Valentin drives.
NOTICE!
As the build-in fonts in Zebra
cause small differences in the text image.
Status information regarding the print order can be indicated.
, , ,
The upper line of display shows the current date, the second line the current time.
With keys and you can change to the next or previous field. With keys
you can increase and/or decrease the displayed values.
On: Printer automatically adjust clock for daylight saving changes.
Off: Summertime is not automatically recognized and adjusted.
Select the format in which you want to define beginning summertime.
DD = day
WW = week
WD = weekday
MM = month,
Y = year
next day = only next day is taken into consideration
By means of this function you can enter the date at which summertime has to start. This entry
refers to the previously selected format.
By means of this function you can define the time when you want to start summertime.
Select the format in which you want to define end of summertime.
By means of this function you can define the date when you want to stop summertime. The
entry refers to the previously selected format.
By means of this function you can define the time when you want to stop summertime.
By means of this function you can enter time shifting in hours and minutes (for automatically
adjustment from summer and wintertime). This entry refers to the currently set printer time.
®
printers are not available in Valentin devices this can
, ,
English
and