System DHCP
Service
FortiGate-50A Administration Guide
FortiGate-50A Administration Guide Version 2.80 MR6
You can configure DHCP server or DHCP relay agent functionality on any FortiGate
interface or VLAN subinterface.
A FortiGate interface can act as either a DHCP server or as a DHCP relay agent. An
interface cannot provide both functions at the same time.
Note: To configure DHCP server or DHCP relay functionality on an interface, the FortiGate unit
must be in NAT/Route mode and the interface must have a static IP address.
This section describes:
•
Service
•
Server
•
Exclude range
•
IP/MAC binding
•
Dynamic IP
Go to System > DHCP > Service to configure the DHCP service provided by each
FortiGate interface. You can configure each interface to be a DHCP relay or a DHCP
server or you can turn off DHCP services.
Figure 22: DHCP service list
01-28006-0001-20041105
73
Need help?
Do you have a question about the FortiGate FortiGate-50A and is the answer not in the manual?
Questions and answers