System Dhcp; Service - Fortinet FortiGate FortiGate-300 Administration Manual

Fortinet fortigate fortigate-300: user guide
Hide thumbs Also See for FortiGate FortiGate-300:
Table of Contents

Advertisement

System DHCP

Service

FortiGate-300 Administration Guide
FortiGate-300 Administration Guide Version 2.80 MR6
You can configure DHCP server or DHCP relay agent functionality on any FortiGate
interface or VLAN subinterface.
A FortiGate interface can act as either a DHCP server or as a DHCP relay agent. An
interface cannot provide both functions at the same time.
Note: To configure DHCP server or DHCP relay functionality on an interface, the FortiGate unit
must be in NAT/Route mode and the interface must have a static IP address.
This section describes:
Service
Server
Exclude range
IP/MAC binding
Dynamic IP
Go to System > DHCP > Service to configure the DHCP service provided by each
FortiGate interface. You can configure each interface to be a DHCP relay or a DHCP
server or you can turn off DHCP services.
Figure 20: DHCP service list
Interface
List of FortiGate interfaces.
Service
The DHCP service provided by the interface (none, DHCP Relay, or DHCP
Server).
Edit/View icon. Select to view or modify the DHCP service configuration for
an interface.
01-28006-0005-20041105
73

Advertisement

Table of Contents
loading

Table of Contents