Related Manuals for Whyte T-130 Works SCR
Summarization of Contents
Geometry
2.1 Whyte G-150 Geometry
Detailed geometry specifications for the Whyte G-150 model.
2.2 Whyte T-130 Geometry
Detailed geometry specifications for the Whyte T-130 model.
2.3 Whyte T-129 Works & T-129 S Geometry
Detailed geometry for Whyte T-129 models.
2.4 Whyte T-129 Works SCR Geometry
Detailed geometry for Whyte T-129 SCR model.
2.5 Whyte M-109C Geometry
Detailed geometry specifications for the Whyte M-109C model.
Preparations for Riding
3.1 Making Adjustments
Guidance on general adjustments and component setup.
3.2 Whyte Inter Grip Seat Clamp Adjustment & Service
Instructions for adjusting and servicing the seat clamp.
3.3 Set Up of Fork
Procedure for setting up the front suspension fork.
3.4 Set Up of Rear Damper
Procedure for setting up the rear suspension damper.
3.5 Suspension Tuning Log
Template for recording suspension settings.
Safety
General Safety and Usage Warnings
Important safety advice, weight limits, and component care.
Lubrication
5.1 Whyte Inter Grip Seat Clamp Lubrication
Specific lubrication guidance for the seat clamp.
5.2 General Whyte Lubrication
General advice on lubricating bicycle components.
Servicing the Rear Suspension
6.1 Removing the Rear Shock and Swinging Arm
Procedure for removing suspension components from the frame.
6.1.1 Remove Rear Shock and Swinging Arm (G-150)
Procedure for removing suspension components from G-150.
6.1.2 Remove Rear Shock and Swinging Arm (T-129/T-130/M-109C)
Procedure for removing suspension from T-129/T-130/M-109C.
6.2 Stripping and Re-assembling Bearings
Detailed steps for disassembling and reassembling suspension bearings.
6.2.1 Bearing Extraction
Steps to remove bearings from suspension components.
6.2.2 Bearing Insertion
Steps to install new bearings into suspension components.
6.2.3 Shield Washer and Spacer Reassembly
Procedure for reassembling washers and spacers.
6.3 Re-assembling the Rear Suspension
Steps for reassembling the complete rear suspension system.
6.3.1 Re-assemble Whyte G-150 Rear Suspension
Steps to reassemble the rear suspension for the G-150 model.
6.3.2 Re-assemble Whyte T-129/T-130/M-109C Rear Suspension
Steps to reassemble the rear suspension for T-129/T-130/M-109C.
Servicing Whyte Modular Dropout Systems
7.1 Removing Modular Rear Dropouts
Procedure for removing modular rear dropout systems.
7.1.1 Shimano E-Thru System Removal
Procedure for removing Shimano E-Thru dropout system.
7.1.2 SRAM Maxle 142mm System Removal
Procedure for removing SRAM Maxle 142mm dropout system.
7.2 Re-assembling Modular Rear Dropouts
Procedure for reassembling modular rear dropout systems.
7.2.1 Shimano E-Thru System Reassembly
Procedure for reassembling Shimano E-Thru dropout system.
7.2.2 SRAM Maxle 142mm System Reassembly
Procedure for reassembling SRAM Maxle 142mm dropout system.
7.1.3 Rear Derailleur Adjustment
Steps to adjust the rear derailleur for optimal performance.
Internal Cables & Hoses
9.1 To replace cable or hose outers
Guide to replacing outer cables and brake hoses.
9.2 To fit a 'Dropper' seat-post with internal hose
Instructions for fitting dropper seat posts with internal hoses.
Torque Settings
Rear Suspension and Dropout Torque Settings
Specifications for tightening various suspension and dropout fasteners.
Seat Post Clamp Torque Settings
Specifications for tightening the seat post clamp.
Need help?
Do you have a question about the T-130 Works SCR and is the answer not in the manual?
Questions and answers