A6 How To Use The Hyperterminal To Communicate With The Nic Interface - Phihong PoE125U User Manual

A6 How to use the HyperTerminal to communicate with the NIC Interface?
HyperTerminal is an emulator tool that allows you to connect to other computers, Internet telnet
supported sites, and host computers, using your modem or a null modem cable. HyperTerminal
can be used to retrieve general information about your NIC Interface Midspan.
Please use the Ethernet Manager Tool (etm.exe) to verify the IP address of your NIC Interface
Midspan.
Point to the
Click .
NOTE: Assure the connection path between your PC and the Midspan. Your IP Address and
Midspan Setup Password may be different from the example shown below. Please
assure you are using the last password stored in the Controller Setup.
HyperTerminal setup:
Create a name for the connection file and click OK. In the example, the IP address for the NIC
Interface Midspan is the name.
Select TCP/IP (Winsock) for a TCP/IP connection method.
Phihong USA Corporation • East Coast Engineering Center • 630 Johnson Ave. Suite 102, Bohemia, NY 11716 • Tel: (631) 610-2289
www.Phihong.com or www.Midspans.com
36