Led Indicators - Phihong PoE125U User Manual

2.6 LED Indicator:
Only the top row LEDs indicate the status of PoE output while the bottom row LEDs always stay
off. The detail of the LED indicator is shown in Table 1.
LED Indicator For Models
POE125U-8-R
POE125U-8-C-R
POE125U-8-N-R
Port POE LED
(Top Row LED
only)
POE125U-4AT-R
POE240U-4UP-R
NIC LED
POE125U-8-N-R
(-N Model Only)
Phihong USA Corporation • East Coast Engineering Center • 630 Johnson Ave. Suite 102, Bohemia, NY 11716 • Tel: (631) 610-2289
Green
Off
On
Off
On
On
(blinking
periodically)
On
(blinking
periodically)
OFF
Blinking
slowly
Blinking
slowly
Blinking fast
Table 1: LED Indicator
www.Phihong.com or www.Midspans.com
11
Conditions
Orange
N/A No PoE PD connected or
Port disabled
(always stay off)
N/A
PoE PD connected
(always stay off)
No PoE PD connected
Off
Off PoE PD connected
Fault condition: wrong
On
signature detected, or
(blinking
overload or short circuit
periodically)
condition etc.
Off PoE PD connected, but PD
is dropped off as not
enough load current
NIC card is not working
OFF
OFF
Power on, no Ethernet
connection
Blinking Power on, Ethernet is
connected, but data
slowly
communication not set up
Power on, Ethernet is
connected, data
Blinking fast
communication is in
process
Indication