AllPondSolutions 400-HO Manual page 5

Carefully examine your filter after installation. Do not
·
plug in the unit to the mains if there is water on any
parts not intended to be wet.
If the unit shows any signs of water leakage,
·
disconnect the power supply cord from the wall
socket and consult All Pond Solutions or the retailer
you purchased this unit from for further advice.
If the plug or unit does get wet, DON'T unplug the
·
cord. First, disconnect the circuit breaker or fuse that
supplies power to the appliance. Next, unplug and
inspect for water presence in the receptacle.
To avoid injury, do not touch hot or moving parts
·
such as, but not limited to, heaters, reflectors, UV
bulbs or impellers.
Please note – this appliance can be used by children
aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge, provided they are given
supervision and instruction concerning use of the
appliance and understand the hazards involved.
Children must not play with the appliance. Any
maintenance must not be made by children without
supervision.
ELECTRIC
This unit comes complete with a generous supply of 3
core cable, however should any additional cable be
required, the use of an approved waterproof cable
connector with a proper rating is essential. A cord rated for
less amperes or watts than the appliance rating may
overheat.