Alarm (protective function)
12 Alarm (protective function)
When an alarm generates, the ALM-B output will turn OFF and POWER/ALARM LED will blink in red.
Before resetting an alarm, always remove the cause of the alarm and ensure safety.
If the motor cannot be operated properly after resetting the alarm, the driver may have been damaged.
For details about alarms, refer to the AZ Series Function Edition.
Reset alarm
Cycle the power supply of the driver.
Click [Alarm Reset] on the MEXE02.
Example of the alarm monitor screen of the MEXE02
The alarm message can be checked using the "Alarm monitor" of the MEXE02.
▌44
Resets the alarm.
The measures are
The cause that generated
displayed.
the alarm is displayed.