Next Steps - Fortinet FortiGate FortiGate-3000 Installation Manual

Transparent mode installation

Next steps

FortiGate-3000 Installation Guide
Figure 10: FortiGate-3000 Transparent mode connections
Other Network
You can use the following information to configure FortiGate system time, to register
the FortiGate unit, and to configure antivirus and attack definition updates.
Refer to the FortiGate Administration Guide for complete information on configuring,
monitoring, and maintaining your FortiGate unit.
To set the date and time
For effective scheduling and logging, the FortiGate system date and time must be
accurate. You can either manually set the system date and time or configure the
FortiGate unit to automatically keep its time correct by synchronizing with a Network
Time Protocol (NTP) server.
1 Go to System > Config > Time.
2 Select Refresh to display the current FortiGate system date and time.
3 Select your Time Zone from the list.
4 Optionally, select Automatically adjust clock for daylight saving changes check box.
5 Select Set Time and set the FortiGate system date and time.
Hub
(optional)
Port 1
Esc Enter
1 2
FortiGate-3000
01-28005-0026-20041101
Internal Network
Hub, Switch
or Router
Internal
POWER 1 2 3
Hi-Temp 4/HA INT EXT
3 4/HA INTERNAL EXTERNAL
External
Internet
Next steps
Public Switch
or Router
45