Manual Consulting; Structure Of The Manual; Description Of The Pictograms - Schenker SMART 100 Installation, Use And Maintenance Manual

Digital 12/24 v dc

Table of Contents

1 – MANUAL CONSULTING

1. MANUAL CONSULTING

The manual is divided into chapters, which gather all the information necessary to use the system without any

risk.

Within each chapter there is a subdivision in paragraphs to focus on essential points; each paragraph can be

pointed out with a subtitle and a description.

At the top of each page the heading section is reported in order to remind the reader the field of the page.

Within the chapter, for example chapter 1, we will have:

Chapter title

1.1

Paragraph title

1.1.1

Subtitle

1.1.1.1

Further subtitles

The numbering of the pages, figures and tables, is reset to each chapter; therefore, we will find the prefix

indicating the chapter and the page number, figure or table in progressive that starts from number 1 at the

beginning of each chapter.

The following symbols will be used in the manual to highlight particularly important indications and warnings:

ATTENTION:

This symbol indicates accident prevention regulations for the operator and / or for any exposed

persons.

CAUTION:

This symbol indicates that there is the possibility of damaging the system and / or its components.

NOTE:

This symbol indicates useful information.

THE PRESENT MANUAL BELONGS TO -

Schenker Italia

COD.

100S12/24.D.2018

Table of Contents