Operation With Blades - Echo SRM-3020U Operator's Manual

SRM-3020U
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.

Operation With Blades

Metal blades are very sharp and can cause severe injuries, even
if engine is off and blades are not moving. Avoid contact with
blades. Wear gloves to protect hands.
Blade use demands specific brush cutter configuration.
Operation without specified shield, barrier bar or U-handle, and
harness can result in serious personal injury. Follow installation
instructions.
Pro Maxi-Cut
Grass/Weed
Blade
Support
Handle, with or
without Barrier
Bar
Shield with
cutoff knife
Upper Plate &
Flat Washer
*ANSI standards require brush cutters be equipped with a barrier bar or
restrictive harness. U-Handle ensures a higher safety factor.
X7502350202
© 12/2019 ECHO Inc.
Tri-Cut Grass/
Weed Blade
U-Handle or Support Handle with
Barrier Bar
Shield without cutoff knife
Harness
Upper/Lower Blade Plates
Hex Nut
New Cotter Pin
Metal Grass /
Weed Blade
OPERATION
Metal Brush /
Clearing
Blades
U-handle*
23