Mira Platinum Dual Installation Manual page 23

Drill and plug the fixing holes.
Note! Installers may wish to use alternative cavity fixings, when installing onto
a dry lined, stud partition, shower cubicle or laminated panel wall structures.
However, these methods of fixing are beyond the scope of this guide.
Secure the Digital Mixer Valve in position with the fixing screws (supplied).
Caution! Risk of product damage. Make sure both hot and cold supply
pipes are flushed thoroughly prior to connection to the Digital Mixer Valve.
Any product malfunction caused by pipework debris is not covered under
the guarantee.
Connect the hot and cold water supply pipes to the Digital Mixer Valve as
indicated on the product lid.
Push-fit connector to the
Shower Fittings
Install the Shower Fittings and Wireless Controller (see further instructions).
Hot Inlet
Outlets
23
Wiring to an easily accessible
Switched Fused Spur Box
Cold Inlet
Push-fit Isolators fitted
to both Inlets
1199702-W2-G