3. Install the:
a)
Hard drive and optical drive module
b)
Front bezel
c)
Side cover
4. Follow the procedure in
System fan
Removing the system fan
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Front bezel
c)
Hard drive and optical drive module
3. To remove the system fan:
a) Disconnect the system fan cable from the system board [1].
b) Slide the fan grommets towards the slot on the back of the fan chassis [2].
c) Lift the fan away from the system [3, 4].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
81