8. Install the:
a)
Front bezel
b)
Side cover
9. Follow the procedure in
Optical drive
Removing the optical drive
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Front bezel
3. To remove the optical drive:
a) Disconnect the hard drive data cable and power cable from the connectors on the hard drive [1, 2].
b) Slide the release tab to unlock the hard drive and optical module [3].
c) Lift the hard drive and optical module [4].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
35