Basic Operations; How To Reset Your Unit; Turning On The Power; Turning Off The Power - Kenwood DDX418BT Instruction Manual

Basic Operations

Basic Operations

How to reset your unit

If the unit fails to operate properly, press the reset
button.

Turning on the power

Turning off the power

(Hold)

Putting the unit in standby

1
Display the source/option selection
screen.
On the Home screen, touch as follows:
4 ENGLISH
2
Put the unit in standby.
On the source/option selection screen, touch as
follows:

Turning off the screen

On the pop-up short-cut menu
1
Display the pop-up short-cut menu.
DDX418BT/ DDX4018BT
DDX418BTM
2
On the pop-up short-cut menu, touch as
follows:
To turn on the screen: Touch the screen.
On the monitor panel
(Only for DDX4018BT)
(Hold)
To turn on the screen: Press and hold DISP OFF on
the monitor panel or touch the screen.

Adjusting the volume

DDX418BT/DDX418BTM
You can adjust the volume (00 to 35) by pressing
increase and pressing K to decrease.
J
• Holding increases the volume continuously to
level 15.
DDX4018BT
You can adjust the volume (00 to 35) by turning
the knob to the right to increase and to the left to
decrease.

Mute/attenuating the sound

DDX418BT/ DDX4018BT
DDX418BTM
(Hold)
MUTE or ATT indicator lights up.
To cancel: Press the same button again.
J to