Input Settings - Kenwood DDX418BT Instruction Manual

Settings Settings

Input settings

Display the <Input> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch [Input].
E.g. Input settings screen for DDX418BT
<Front Camera>
Configure the front view camera settings.
<Front Camera>
• ON: Activates the front view camera. Select this to
use the front view camera.
• OFF (Initial): Select this when no camera is
connected.
<Reverse Image>
• ON: Displays the picture from the front view camera
horizontally reversed.
• OFF (Initial): Displays the picture from the front view
camera as it is.
36 ENGLISH
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
• ON: Displays the picture from the rear view camera
when you shift the gear to the reverse (R) position.
– A caution message appears on the screen. To
remove the caution message, touch the screen.
• OFF (Initial): Select this when no camera is
connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Select the mark (1), then adjust the position of the
selected mark (2).
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialize ] for 2 seconds to set all
the marks to the initial default position.
<Navigation>
Change the navigation settings.
<Guidance>
Select which front speakers are used for the navigation
guidance.
<Volume>
Adjust the volume (0 to 35) of the navigation guidance.
<NAV Mute>
• ON (Initial): Attenuates the sound coming out
of speakers other than the front speakers during
navigation guidance.
• OFF: Cancels the attenuation.
<NAV Setup>
Press [Enter] to display the setup screen for the
navigation unit. See the instruction manual supplied
for the navigation unit.