Safety Summary - Bin Master C-100MB Operator's Manual

Safety Summary

Review the following safety precautions to avoid injury and prevent damage to the equipment.
The product should be installed, commissioned, and maintained by qualified and authorized personnel
only.
Install according to installation instructions and comply with all national and local codes.
Use electrical wire that is sized and rated for the maximum voltage and current of the application.
Insure that the enclosure cover is in place and secured tightly during normal operation.
In potentially wet environments thoroughly seal all conduit entries.
If this product is used in a manner not specified by the manufacturer the safety protection could be
compromised.
Safety Terms and Symbols
WARNING: Warning statements identify conditions or practices that could result in injury or loss
of life. Risk of electrical shock.
CAUTION: Caution statements identify conditions or practices that could result in damage to this
product or other property.
FCC Compliance
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
925-0301 Rev C 4