Removing The Power Button With Fingerprint Reader; Prerequisites; Procedure - Dell Inspiron 13-7370 Service Manual

Removing the power button with
fingerprint reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

NOTE: The power button with fingerprint reader is shipped only with the
non-touchscreen configuration of the Inspiron-13 7370.
1 Remove the base
2 Remove the wireless
3 Remove the I/O

Procedure

1 Open the latch and disconnect the power button with fingerprint reader cable
from the system board.
2 Open the latch and disconnect the power button with fingerprint reader cable
from the power button with fingerprint reader connector cable.
64
computer. After working inside your computer, follow
After working inside your
cover.
card.
board.
computer. For more safety best
www.dell.com/
Before