Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 13-7370 Service Manual

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Follow the procedure from step 1 to step 4 in

Procedure

NOTE: The touchscreen-board cable removal is only applicable for
computers shipped with touchscreen configuration.
1 Remove the antenna cables from the routing guides on the palm-rest assembly.
2 Peel off the adhesive tapes that secure the display cable and touchscreen-board
cable to the system board.
3 Open the latch and disconnect the display cable from the system board.
40
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Removing the wireless
Before
card.