Table of Contents
Advertisement
Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on the keyboard bracket.
2
Replace the two screws (M2x3) securing the fan to the keyboard bracket.
3
Route the I/O-board cables through the routing guides on the fan.
4
Connect the fan cable to the system board.
Post-requisites
1
Follow the procedure from step 3 to step 5 in
fingerprint
reader. (if installed)
2
Replace the
base
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Replacing the power button with
Before
29
Advertisement
Table of Contents
