Starter; Cleaning Or Replacing Uv Lamps In The Door - ergoline SUNRISE 480 LED ADVANCED PERFORMANCE Operating Instructions Manual

07/2016 1016256-00B
4.8.3

Starter

Replace faulty starters immediately.

You can recognize a faulty starter by the blackened ends of the (UV) low
pressure lamps or when the (UV) low pressure lamps can no longer be start-
ed.
Operating a (UV) low pressure lamp with a faulty starter significantly shortens
its service life. The (UV) low pressure lamp loses power and may begin to
flicker under certain circumstances.
The starters are located in either one of the two lamp sockets or become
visible when the (UV) low pressure lamps are removed.
– Turn 90° and carefully remove from the socket.
4.9 Cleaning or replacing UV lamps in the
door
WARNING!
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
– Remove fingerprints and other soiling carefully.
Door handle:
– Remove the screws and remove door handle.
This work step is not applicable on devices with privacy shield.
Acrylic glass panel:
– Remove the screws.
– Remove the acrylic glass panel and carefully lay it aside.
Cleaning and maintenance
Operating instructions – 47/64