TP-Link TL-R600VPN Configuration Manual page 23

Configuring Network
 Configuring the L2TP
Choose the menu Network > WAN > WAN to load the following page.
Figure 2-5 Configuring the L2TP
In the Connection Configuration section, select the connection type as L2TP. Enter the
corresponding parameters and click Save.
Connection Type
Username
Password
Connection
Mode
Time
Choose the connection type as L2TP if your ISP provides you with an L2TP account.
Enter the L2TP username provided by your ISP.
Enter the L2TP password provided by your ISP.
Choose the connection mode, including Connect Automatically, Connect Manually
and Time-Based.
Connect Automatically: The router will activate the connection automatically when
the router reboots or the connection is down.
Connect Manually: You can manually activate or terminate the connection.
Time-Based: During the specified period, the router will automatically activate the
connection.
Choose the effective time range when the Connection Mode is chosen as Time-
Based. To create the time range, go to Preferences > Time Range > Time Range.
WAN Configuration
Configuration Guide 15