TP-Link TL-R600VPN Configuration Manual page 158

Configuring VPN
Figure 5-14 Configuring the L2TP Server
4) Choose the menu VPN> Users > Users to load the configuration page, and click
Add. Specify the account name as tplink, and enter the password 123456. Select
the protocol as L2TP, specify the LAN IP (192.168.0.1) as the local IP address of the
gateway router, select VPN_Pool as the IP address pool to assign an IP address for the
L2TP client, enter the DNS address (for example, 8.8.8.8), select the network mode as
Client-to-LAN as the VPN gateway is connected to a host, specify the max connections
as 3, then click OK.
Figure 5-15 Configuring the VPN User
 Configuring the Remote PC
For remote PC, use Windows built-in L2TP software or third-party L2TP software to
connect to L2TP server. For more information, you can refer to our official website:
http://www.tp-link.com/us/faq-1629.html
Configuration Examples
Configuration Guide 150