System Tools
Figure 6-3 Predefined Mode Page
In the Daylight Saving Time section, select one predefined DST schedule and click Save.
DST Status
Mode
USA
Europe
Australia
New Zealand
6.2.2 Recurring Mode
Choose the menu System Tools > Time Settings > Time Settings to load the following
page.
Figure 6-4 Recurring Mode Page
In the Daylight Saving Time section, configure the following parameters and click Save.
Check the box to enable the DST function.
Select Predefined Mode to choose a predefined daylight saving time.
Select the Daylight Saving Time of the USA. It is from 2: 00 a.m. on the Second Sunday
in March to 2:00 a.m. on the First Sunday in November
Select the Daylight Saving Time of Europe. It is from 1:00 a.m. on the Last Sunday in
March to 1:00 a.m. on the Last Sunday in October.
Select the Daylight Saving Time of Australia. It is from 2:00 a.m. on the First Sunday in
October to 3:00 a.m. on the First Sunday in April.
Select the Daylight Saving Time of New Zealand. It is from 2:00 a.m. on the Last
Sunday in September to 3:00 a.m. on the First Sunday in April.
Time Settings
Configuration Guide
203