Example For Configuring L2Tp Vpn; Network Requirements - TP-Link TL-R600VPN Configuration Manual

Configuring VPN
Figure 5-9 Configuring the IKE Phase-2 Parameters
 Verifying the connectivity of the IPSec VPN tunnel
On Router A or Router B, choose the menu VPN > IPSec > IPSec SA to view the
information of the established IPSec VPN tunnel. Here we take router A for example.
Figure 5-10 Viewing the IPSec SA

5.2 Example for Configuring L2TP VPN

5.2.1 Network Requirements

Employees out of the office need to communicate with the head office and access the
internal resources at any time. And the communication data needs to be well protected.
Thus we can build the remote access VPN tunnel between the employees on official
business and the gateway device of the head office.
In this scenario, both PPTP and L2TP can be used. Here we take L2TP VPN as an example.
Figure 5-11 Remote Access L2TP VPN Topology
Remote PC
WAN1
Internet
L2TP VPN Tunnel
Head Office Gateway
LAN
Router
Server Group
LAN: 192.168.2.0/24
Configuration Examples
Configuration Guide 148