TP-Link TL-R600VPN Configuration Manual page 160

Configuring VPN
 Configuring Router A
1) Choose the menu Preferences > VPN IP Pool > VPN IP Pool to load the configuration
page, and click Add. Specify the pool name as VPN_Pool, and enter the starting/ending
IP address.
Figure 5-18 Configuring the VPN IP Pool
2) Choose the menu VPN> PPTP > Global Config to load the following page. You can keep
the PPTP/PPP hello interval as the default value.
Figure 5-19 Configuring PPTP Globally
3) Choose the menu VPN> PPTP > PPTP Server to load the configuration page, and
click Add. Specify WAN1 as the outgoing interface of PPTP VPN tunnel, enable MPPE
encryption.
Figure 5-20 Configuring the PPTP Server
4) Choose the menu VPN> Users > Users to load the configuration page, and click
Add. Specify the account name as tplink, and enter the password 123456. Select
the protocol as PPTP, specify the LAN IP (192.168.0.1) as the local IP address of the
gateway router, select VPN_Pool as the IP address pool to assign an IP address for
the PPTP client, enter the DNS address (for example, 8.8.8.8), select the network
Configuration Examples
Configuration Guide 152