Checking The Front And Rear Brake Pads; Checking The Brake Fluid Level - Yamaha MT 10 Owner's Manual

Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1
1. Brake pad wear indicator
Each front brake pad is provided with
wear indicators, which allows you to
check the brake pad wear without hav-
ing to disassemble the brake. To check
the brake pad wear, check the position
of the wear indicators while applying
the brake. If a brake pad has worn to
the point that a wear indicator almost
Periodic maintenance and adjustment
EAU22393 touches the brake disc, have a Yamaha
dealer replace the brake pads as a set.
Rear brake pads
EAU36891
1 1
1
1. Brake pad wear indicator groove
Each rear brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear
indicator groove almost appears, have
a Yamaha dealer replace the brake
pads as a set.

Checking the brake fluid level

Before riding, check that the brake fluid
is above the minimum level mark.
EAU48071
Check the brake fluid level with the res-
ervoir in an upright position. Replenish
the brake fluid if necessary.
NOTICE
Brake fluid may damage painted sur-
faces or plastic parts. Always clean
up spilled fluid immediately.
Front brake
1. Minimum level mark
7-21
Specified brake fluid:
DOT 4
LOWER
1
EAU22583
1
2
3
4
5
ECA17641
6
7
8
9
10
11
12