BRC1E73 (Wired Remote Controller)
1. Operation mode selector button
•
Press this button to select the operation
mode of your preference.
* Available modes vary with the indoor unit
model.
2. Fan speed control button
Press this button to select the fan speed of
•
your preference.
* Available fan speeds vary with the indoor
unit model.
3. Menu/OK button
•
Used to enter the main menu.
Used to enter the selected item.
•
4. Up button
•
Used to raise the setpoint.
•
The item above the current selection will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
•
5. Down button
•
Used to lower the setpoint.
The item below the current selection will be
•
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
•
6. Right button
Used to highlight the next items on the
•
right-hand side.
Each screen is scrolled in the right-hand
•
direction.
108
7. Left button
•
Used to highlight the next items on the
left-hand side.
•
Each screen is scrolled in the left-hand
direction.
8. On/Off button
Press this button and system will start.
•
•
Press this button again to stop the system.
9. Operation lamp
•
This lamp illuminates solid green during
normal operation.
•
This lamp flashes if an error occurs.
10. Cancel button
Used to return to the previous screen.
•
11. LCD (with backlight)
•
The backlight will be illuminated for
approximately 30 seconds by pressing any
button.
If two remote controllers are used to control
•
a single indoor unit, only the controller
accessed first will have backlight
functionality.
SiUS121632EA
Remote Controller